P048F Exhaust Pressure Control Valve Position Sensor/Switch Circuit Intermittent/Erratic
What it means
The exhaust pressure control valve position signal is cutting in and out or jumping around.
Can I keep driving?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Command the valve with a scan tool and watch its position reading
- Inspect the position sensor connector and wiring
Signs you may notice
- Check engine light on
- Possible loss of power on diesels
- Slower warm-up in cold weather
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonLoose or corroded connector
- CommonChafed wiring near the exhaust
- PossibleFailing position sensor
Typical repair once the cause is confirmed
Repair the wiring or connector, or replace the actuator.
Common questions
What does P048F mean?
The exhaust pressure control valve position signal is cutting in and out or jumping around.
Can I drive with code P048F?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What causes P048F?
Common possibilities to test include: loose or corroded connector; chafed wiring near the exhaust; failing position sensor. A shop should confirm the cause before replacing parts.