P0490 Exhaust Gas Recirculation "A" Control Circuit High
What it means
The circuit that controls the EGR valve is reading higher voltage than it should, often from an open wire or a failed EGR valve.
Can I keep driving?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Check the EGR valve resistance and connector
- Check for power at the connector with the key on
Signs you may notice
- Check engine light on
- Possible pinging under load
- May fail an emissions test
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonOpen wire or unplugged connector
- CommonFailed EGR valve or solenoid
- PossibleWiring shorted to voltage
Typical repair once the cause is confirmed
Usually a new EGR valve or solenoid, or a wiring repair.
Common questions
What does P0490 mean?
The circuit that controls the EGR valve is reading higher voltage than it should, often from an open wire or a failed EGR valve.
Can I drive with code P0490?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What causes P0490?
Common possibilities to test include: open wire or unplugged connector; failed egr valve or solenoid; wiring shorted to voltage. A shop should confirm the cause before replacing parts.