P0496 Evaporative Emission System High Purge Flow
What it means
Fuel vapors are being pulled into the engine when they should not be, usually because the purge valve is stuck open. This can make the engine hard to start right after filling up.
Can I keep driving?
Usually you can keep driving, but if the engine stalls or won't start right after refueling, get it checked soon, since a stall in traffic is risky. If you smell strong raw fuel or see a leak, stop driving and get it looked at.
What to test before replacing parts
Check whether the purge valve seals when it should be closed, look for charcoal in the purge line, and test the tank pressure sensor before replacing the canister or valve.
- Check if the purge valve holds vacuum with the engine off
- Look for charcoal granules in the purge hose
- Watch fuel tank pressure while the purge valve is commanded closed
Signs you may notice
- Check engine light on
- Hard starting or stalling right after refueling
- Rough idle
- Fuel smell in some cases
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonPurge valve stuck open
- CommonPurge valve leaking when it should be closed
- PossibleCharcoal canister damaged, sending charcoal into the purge line
- PossibleFaulty fuel tank pressure sensor
Typical repair once the cause is confirmed
Usually a new purge valve; also replace the canister if it is leaking charcoal.
Where it shows up
- Often seen on GM cars and trucks when the purge valve sticks open
Known on these vehicles
Common questions
What does P0496 mean?
Fuel vapors are being pulled into the engine when they should not be, usually because the purge valve is stuck open. This can make the engine hard to start right after filling up.
Can I drive with code P0496?
Usually you can keep driving, but if the engine stalls or won't start right after refueling, get it checked soon, since a stall in traffic is risky. If you smell strong raw fuel or see a leak, stop driving and get it looked at.
What causes P0496?
Common possibilities to test include: purge valve stuck open; purge valve leaking when it should be closed; charcoal canister damaged, sending charcoal into the purge line; faulty fuel tank pressure sensor. A shop should confirm the cause before replacing parts.