P0498 Evaporative Emission System Vent Valve Control Circuit Low
What it means
The circuit for the EVAP vent valve is reading lower voltage than it should, usually from a short or a failed valve.
Can I keep driving?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Measure the vent valve resistance
- Inspect the wiring under the vehicle near the tank
Signs you may notice
- Check engine light on
- No change in how the car drives
- Possible trouble filling the tank
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonFailed vent valve
- CommonWiring shorted to ground
- PossibleCorroded connector near the fuel tank
Typical repair once the cause is confirmed
Usually a new vent valve or a wiring repair.
Common questions
What does P0498 mean?
The circuit for the EVAP vent valve is reading lower voltage than it should, usually from a short or a failed valve.
Can I drive with code P0498?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What causes P0498?
Common possibilities to test include: failed vent valve; wiring shorted to ground; corroded connector near the fuel tank. A shop should confirm the cause before replacing parts.