P0499 Evaporative Emission System Vent Valve Control Circuit High
What it means
The circuit for the EVAP vent valve is reading higher voltage than it should, often from an open wire or failed valve.
Can I keep driving?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Measure the vent valve resistance
- Check the connector near the tank for corrosion
Signs you may notice
- Check engine light on
- No change in how the car drives
- Possible trouble filling the tank
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonFailed vent valve coil
- CommonOpen wire or corroded connector
- PossibleWiring shorted to voltage
Typical repair once the cause is confirmed
Usually a new vent valve or a wiring repair.
Common questions
What does P0499 mean?
The circuit for the EVAP vent valve is reading higher voltage than it should, often from an open wire or failed valve.
Can I drive with code P0499?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What causes P0499?
Common possibilities to test include: failed vent valve coil; open wire or corroded connector; wiring shorted to voltage. A shop should confirm the cause before replacing parts.