Home › Code lookup › P04A0
Powertrain code · Engine

P04A0 Exhaust Pressure Control Valve "B" Range/Performance

How urgent? Book a check when convenient

What it means

On engines with a second exhaust pressure control valve, that valve is not producing the result the computer expects when commanded.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Command the valve with a scan tool and watch it move
  2. Check the valve for soot or rust holding it in place
  3. Inspect the wiring and connector

Signs you may notice

  • Check engine light on
  • Possible loss of power on diesels
  • Slower warm-up in cold weather

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonSticking valve from soot or rust
  • CommonFailing actuator
  • PossibleFaulty exhaust pressure sensor

Typical repair once the cause is confirmed

Usually freeing up or replacing the valve, or replacing the pressure sensor.

Repair costInsufficient verified pricing for this vehicle and repair
Replace exhaust pressure control valve. Prepare an itemized shop request.

Common questions

What does P04A0 mean?

On engines with a second exhaust pressure control valve, that valve is not producing the result the computer expects when commanded.

Can I drive with code P04A0?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P04A0?

Common possibilities to test include: sticking valve from soot or rust; failing actuator; faulty exhaust pressure sensor. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.