P04A3 Exhaust Pressure Control Valve "B" Intermittent
What it means
The signal in the second exhaust pressure control valve circuit is cutting in and out.
Can I keep driving?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Command the valve with a scan tool and watch it move
- Check the valve for soot or rust holding it in place
- Inspect the wiring and connector
Signs you may notice
- Check engine light on
- Possible loss of power on diesels
- Slower warm-up in cold weather
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonLoose or corroded connector
- CommonChafed wiring near the exhaust
- PossibleFailing valve actuator
Typical repair once the cause is confirmed
Repair the wiring or connector, or replace the valve.
Common questions
What does P04A3 mean?
The signal in the second exhaust pressure control valve circuit is cutting in and out.
Can I drive with code P04A3?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What causes P04A3?
Common possibilities to test include: loose or corroded connector; chafed wiring near the exhaust; failing valve actuator. A shop should confirm the cause before replacing parts.