P04A9 Exhaust Pressure Control Valve "B" Position Sensor/Switch Circuit High
What it means
The position sensor signal for the second exhaust pressure control valve is higher than possible.
Can I keep driving?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Command the valve with a scan tool and watch its position reading
- Inspect the position sensor connector and wiring
Signs you may notice
- Check engine light on
- Possible loss of power on diesels
- Slower warm-up in cold weather
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonFailed position sensor
- CommonOpen wire or unplugged connector
- PossibleSignal shorted to voltage
Typical repair once the cause is confirmed
Replace the actuator or sensor, or repair the wiring.
Common questions
What does P04A9 mean?
The position sensor signal for the second exhaust pressure control valve is higher than possible.
Can I drive with code P04A9?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What causes P04A9?
Common possibilities to test include: failed position sensor; open wire or unplugged connector; signal shorted to voltage. A shop should confirm the cause before replacing parts.