Home › Code lookup › P0600
Powertrain code · Network

P0600 Serial Communication Link

How urgent? Get it checked in the next few days

What it means

The engine computer has lost or is getting bad communication with another computer in the car over a data link.

Can I keep driving?

Get it checked soon. Network faults can cause limp mode, warning lights, odd shifting or stalling. If the car stalls, won't shift right or several warning lights come on at once, limit driving and consider a tow, since it could quit in traffic.

What to test before replacing parts

Check battery voltage and grounds, scan all modules for communication codes, and inspect network wiring and connectors before replacing any module or the engine computer.

  1. Test the battery and check main grounds
  2. Scan every module for communication (U) codes to see which one is missing
  3. Inspect network wiring and connectors, especially near the computers

Signs you may notice

  • Check engine light on
  • Several other warning lights may come on
  • Transmission may go into limp mode
  • Possible stalling or no start

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonDamaged wiring or loose connector on the communication network
  • CommonLow battery voltage or poor grounds
  • PossibleFaulty module on the network
  • PossibleFaulty engine computer

Typical repair once the cause is confirmed

Usually a wiring, connector or power and ground repair; sometimes a faulty module.

Repair costInsufficient verified pricing for this vehicle and repair
Diagnose and repair network wiring. Prepare an itemized shop request.

Common questions

What does P0600 mean?

The engine computer has lost or is getting bad communication with another computer in the car over a data link.

Can I drive with code P0600?

Get it checked soon. Network faults can cause limp mode, warning lights, odd shifting or stalling. If the car stalls, won't shift right or several warning lights come on at once, limit driving and consider a tow, since it could quit in traffic.

What causes P0600?

Common possibilities to test include: damaged wiring or loose connector on the communication network; low battery voltage or poor grounds; faulty module on the network; faulty engine computer. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.