Home › Code lookup › P0601
Powertrain code · Computer

P0601 Internal Control Module Memory Check Sum Error

How urgent? Get it checked in the next few days

What it means

The engine computer's self-check found that its stored program doesn't add up correctly, meaning its memory may be corrupted.

Can I keep driving?

If the engine stalls, won't start reliably or runs in limp mode, don't rely on the car; a stall in traffic is dangerous, so consider a tow. If it runs normally, get it checked soon, since it may get worse without warning.

What to test before replacing parts

Check battery voltage and the computer's power and grounds, look for water damage, and check for a software reflash before replacing the engine computer.

  1. Test the battery and charging system
  2. Check the computer power and ground connections
  3. Try reprogramming the computer with the latest software

Signs you may notice

  • Check engine light on
  • Engine may not start or may stall
  • Runs poorly or goes into limp mode
  • Sometimes no other symptoms

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFailing engine computer
  • CommonCorrupted software from an interrupted or failed reprogramming
  • PossibleLow battery voltage during programming
  • PossibleWater damage at the computer

Typical repair once the cause is confirmed

Reprogram the computer first; replace and program it if the code returns.

Repair costInsufficient verified pricing for this vehicle and repair
Replace and program engine computer. Prepare an itemized shop request.

Known on these vehicles

Common questions

What does P0601 mean?

The engine computer's self-check found that its stored program doesn't add up correctly, meaning its memory may be corrupted.

Can I drive with code P0601?

If the engine stalls, won't start reliably or runs in limp mode, don't rely on the car; a stall in traffic is dangerous, so consider a tow. If it runs normally, get it checked soon, since it may get worse without warning.

What causes P0601?

Common possibilities to test include: failing engine computer; corrupted software from an interrupted or failed reprogramming; low battery voltage during programming; water damage at the computer. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.