P0603 Internal Control Module Keep Alive Memory (KAM) Error
What it means
The computer's keep-alive memory, which stores learned settings, lost its data. This often happens after the battery is disconnected or goes dead.
Can I keep driving?
Usually safe to keep driving, especially if the battery was recently disconnected or replaced; idle and shifting may feel off for a few drives while the computer relearns. If the code keeps coming back or the car stalls, get it checked.
What to test before replacing parts
Clear the code and see if it returns, then check the battery terminals and the computer's constant-power fuse and wiring before replacing the computer.
- Find out whether the battery was recently disconnected or died
- Check the battery terminals and the computer constant-power fuse
- Clear the code and see if it returns after a few drives
Signs you may notice
- Check engine light on
- Idle or shifting may feel off until the computer relearns
- Often shows up after battery work
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonBattery recently disconnected, replaced or run dead
- CommonLoose or corroded battery terminals
- PossibleBlown fuse or poor connection on the computer constant-power feed
- PossibleFailing engine computer
Typical repair once the cause is confirmed
Often goes away after fixing the battery connection and clearing the code; replace the computer only if it keeps coming back with good power.
Known on these vehicles
Common questions
What does P0603 mean?
The computer's keep-alive memory, which stores learned settings, lost its data. This often happens after the battery is disconnected or goes dead.
Can I drive with code P0603?
Usually safe to keep driving, especially if the battery was recently disconnected or replaced; idle and shifting may feel off for a few drives while the computer relearns. If the code keeps coming back or the car stalls, get it checked.
What causes P0603?
Common possibilities to test include: battery recently disconnected, replaced or run dead; loose or corroded battery terminals; blown fuse or poor connection on the computer constant-power feed; failing engine computer. A shop should confirm the cause before replacing parts.