P0602 Control Module Programming Error
What it means
The engine computer is not programmed, or its programming did not complete correctly.
Can I keep driving?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Ask whether the computer was recently replaced or updated
- Reprogram with a battery maintainer connected
Signs you may notice
- Check engine light on
- Engine may not start or may run poorly
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonComputer not programmed after replacement
- CommonInterrupted or failed software update
- PossibleLow battery voltage during programming
- PossibleInternal computer fault
Typical repair once the cause is confirmed
Usually reprogramming the computer; replace it only if programming will not take.
Known on these vehicles
Common questions
What does P0602 mean?
The engine computer is not programmed, or its programming did not complete correctly.
Can I drive with code P0602?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What causes P0602?
Common possibilities to test include: computer not programmed after replacement; interrupted or failed software update; low battery voltage during programming; internal computer fault. A shop should confirm the cause before replacing parts.