P2515 A/C Refrigerant Pressure Sensor "B" Circuit
What it means
The computer is watching the second A/C refrigerant pressure sensor and has spotted an electrical fault. This sensor tells the computer how much pressure is in the A/C system so it can protect the compressor.
Can I keep driving?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Look over the connector and wiring for the second A/C refrigerant pressure sensor, checking for damage, corrosion or a loose fit
- Check power, ground and signal with a meter
- Clear the code and see if it comes back
Signs you may notice
- Check engine light on
- A/C may blow warm or cut out
- Cooling fans may run more than usual
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonUnplugged, loose or corroded connector at the second A/C refrigerant pressure sensor
- CommonBroken or chafed wire in the second A/C refrigerant pressure sensor circuit
- CommonFailed second A/C refrigerant pressure sensor
- PossibleMissing reference voltage or ground from the computer
- PossibleControl module fault (rare)
Typical repair once the cause is confirmed
Repair the wiring or connector if it is damaged; otherwise replace the second A/C refrigerant pressure sensor.
Common questions
What does P2515 mean?
The computer is watching the second A/C refrigerant pressure sensor and has spotted an electrical fault. This sensor tells the computer how much pressure is in the A/C system so it can protect the compressor.
Can I drive with code P2515?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What causes P2515?
Common possibilities to test include: unplugged, loose or corroded connector at the second a/c refrigerant pressure sensor; broken or chafed wire in the second a/c refrigerant pressure sensor circuit; failed second a/c refrigerant pressure sensor; missing reference voltage or ground from the computer. A shop should confirm the cause before replacing parts.