P2516 A/C Refrigerant Pressure Sensor "B" Circuit Range/Performance
What it means
The computer is watching the second A/C refrigerant pressure sensor and is getting a signal that does not make sense for current conditions. This sensor tells the computer how much pressure is in the A/C system so it can protect the compressor.
Can I keep driving?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Check for other codes that point to the underlying problem
- Compare the second A/C refrigerant pressure sensor reading with expected values in live data
- Inspect the wiring and connector
Signs you may notice
- Check engine light on
- A/C may blow warm or cut out
- Cooling fans may run more than usual
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonFailing or sticking second A/C refrigerant pressure sensor
- CommonRefrigerant charge too low or too high
- PossibleWiring or connector with high resistance
- PossibleComputer software that needs an update
Typical repair once the cause is confirmed
Find out whether the second A/C refrigerant pressure sensor itself or the system it works with is at fault, then repair or replace as needed.
Common questions
What does P2516 mean?
The computer is watching the second A/C refrigerant pressure sensor and is getting a signal that does not make sense for current conditions. This sensor tells the computer how much pressure is in the A/C system so it can protect the compressor.
Can I drive with code P2516?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What causes P2516?
Common possibilities to test include: failing or sticking second a/c refrigerant pressure sensor; refrigerant charge too low or too high; wiring or connector with high resistance; computer software that needs an update. A shop should confirm the cause before replacing parts.