Your 1997 Ford Crown Victoriaproblems, repair costs and recalls
What we've documented about the 1997 Ford Crown Victoria: problems owners and shops report, typical repair and upkeep costs, and safety recalls.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems for your 1997 Ford Crown Victoria
3 documented issues apply to 1997, most serious first.
Cracked plastic intake manifold coolant passage
- What you'll notice
- Coolant leaking at the front of the engine near the thermostat housing, a sweet smell, a dropping coolant level and possible overheating.
- Why it happens
- The all-plastic intake manifold's coolant crossover can crack from repeated heating and cooling, and the heater hose and sensor fittings can loosen. Ford changed to an aluminum crossover for 2002.
- What to do
- Watch the temperature gauge and pull over if it rises. Replace the manifold with the updated design.
Cruise control deactivation switch can start an underhood fire (recall)
- What you'll notice
- Smoke or a burning smell from the engine bay, sometimes even with the car parked and switched off; cruise control may stop working.
- Why it happens
- The cruise control shut-off switch mounted on the brake master cylinder can leak brake fluid internally, overheat and burn. Ford first disconnected the switch, then fitted a fused wiring harness, and recalled some cars again because the first harness was wired with the wrong polarity.
- What to do
- Check the VIN for recalls 07V-336 and 08V-051. Until both are done, park away from buildings, and if you see smoke or smell burning, stop and shut the engine off.
Automatic transmission slipping or failure
- What you'll notice
- Slipping, harsh or late shifts, loss of overdrive, or the car not wanting to move in Drive or Reverse.
- Why it happens
- The 4-speed automatic is one of the most reported repairs on this car, and a failing front pump is a common cause. Police, taxi and high-idle use add heat and wear.
- What to do
- Have the fluid and shifting checked at the first sign of slipping. Continuing to drive a slipping transmission usually turns a smaller repair into a rebuild.
Repair prices for your 1997 Ford Crown Victoria
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Replace intake manifold
- Replace cruise deactivation switch and add fused jumper
- Replace transmission with a remanufactured unit
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Checking the NHTSA recall database…