Your 2002 Ford Crown Victoriaproblems, repair costs and recalls
What we've documented about the 2002 Ford Crown Victoria: problems owners and shops report, typical repair and upkeep costs, and safety recalls.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems for your 2002 Ford Crown Victoria
4 documented issues apply to 2002, most serious first.
Coolant leak where the intake manifold meets the aluminum crossover
- What you'll notice
- Coolant slowly disappearing, a sweet smell, or wetness and crust at the front of the engine near the thermostat housing. Coolant can pool in the valley under the manifold where it is hard to see.
- Why it happens
- From 2002 Ford added an aluminum coolant crossover to the plastic intake manifold. That cut down on cracking, but the joint between the aluminum and plastic parts tends to seep as the engine ages. The gasket is not sold on its own, so the usual repair is a new manifold.
- What to do
- Keep the coolant topped up and watch the temperature gauge. Have the leak confirmed and the manifold replaced before it gets worse, and pull over if the engine starts to overheat.
Automatic transmission slipping or failure
- What you'll notice
- Slipping, harsh or late shifts, loss of overdrive, or the car not wanting to move in Drive or Reverse.
- Why it happens
- The 4-speed automatic is one of the most reported repairs on this car, and a failing front pump is a common cause. Police, taxi and high-idle use add heat and wear.
- What to do
- Have the fluid and shifting checked at the first sign of slipping. Continuing to drive a slipping transmission usually turns a smaller repair into a rebuild.
Power window stops working from a worn regulator
- What you'll notice
- A grinding or clicking from inside the door, a window that creeps down or jams part way, or one window that stops moving while the others still work.
- Why it happens
- The plastic parts and cable in the window regulator wear out and let go, so the motor turns but the glass does not move.
- What to do
- Get the regulator replaced when a window sticks, especially before winter, since the glass can drop into the door and leave the car open to weather.
Front suspension and steering parts wear out
- What you'll notice
- Clunks over bumps, wandering or loose steering, uneven front tire wear, and a shimmy you feel through the wheel.
- Why it happens
- Ball joints, stabilizer bar links and the steering idler arm carry a heavy front end and wear out, which lets the front wheels move around.
- What to do
- Have the front end inspected and the worn parts replaced; it is a common repair on these cars and it brings the steering and tire wear back to normal.
Repair prices for your 2002 Ford Crown Victoria
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Replace intake manifold and gaskets
- Replace transmission with a remanufactured unit
- Replace power window regulator and motor
- Replace front ball joints and stabilizer bar links
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Checking the NHTSA recall database…