Home › Ford › Crown Victoria › 1999
My vehicle

Your 1999 Ford Crown Victoriaproblems, repair costs and recalls

What we've documented about the 1999 Ford Crown Victoria: problems owners and shops report, typical repair and upkeep costs, and safety recalls.

Ownership snapshot

Averages, not quotes
Problems documented for 199941 rated serious
Safety recalls…Checking NHTSA

Routine maintenance costs (model-wide, not specific to one year or engine)

Oil and filter changeEvery 5,000–7,500 miles · 4.6L V8 holds about 6 quarts of 5W-20.
Price not verified
Ask for an estimate
Front brake pads and rotorsAbout every 30,000–50,000 miles
Price not verified
Ask for an estimate
Rear brake pads and rotorsAbout every 40,000–70,000 miles
Price not verified
Ask for an estimate
12-volt battery replacementAbout every 3–5 years
Price not verified
Ask for an estimate
Spark plug replacementAbout every 100,000 miles · Older 4.6L heads can strip plug threads; plugs must not be overtightened.
Price not verified
Ask for an estimate
Coolant drain and refillAbout every 5 years or 100,000 miles
Price not verified
Ask for an estimate

The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.

Known problems for your 1999 Ford Crown Victoria

4 documented issues apply to 1999, most serious first.

Stop soon1996–2001Cooling4.6L V8

Cracked plastic intake manifold coolant passage

What you'll notice
Coolant leaking at the front of the engine near the thermostat housing, a sweet smell, a dropping coolant level and possible overheating.
Why it happens
The all-plastic intake manifold's coolant crossover can crack from repeated heating and cooling, and the heater hose and sensor fittings can loosen. Ford changed to an aluminum crossover for 2002.
What to do
Watch the temperature gauge and pull over if it rises. Replace the manifold with the updated design.
Repair costInsufficient verified pricing for this vehicle and repair
Replace intake manifold. Prepare an itemized shop request.
Get checked1996–2011Transmission

Automatic transmission slipping or failure

What you'll notice
Slipping, harsh or late shifts, loss of overdrive, or the car not wanting to move in Drive or Reverse.
Why it happens
The 4-speed automatic is one of the most reported repairs on this car, and a failing front pump is a common cause. Police, taxi and high-idle use add heat and wear.
What to do
Have the fluid and shifting checked at the first sign of slipping. Continuing to drive a slipping transmission usually turns a smaller repair into a rebuild.
Repair costInsufficient verified pricing for this vehicle and repair
Replace transmission with a remanufactured unit. Prepare an itemized shop request.
Walk through this symptom: Transmission slipping →
Get checked1999–2002Body

Power window stops working from a worn regulator

What you'll notice
A grinding or clicking from inside the door, a window that creeps down or jams part way, or one window that stops moving while the others still work.
Why it happens
The plastic parts and cable in the window regulator wear out and let go, so the motor turns but the glass does not move.
What to do
Get the regulator replaced when a window sticks, especially before winter, since the glass can drop into the door and leave the car open to weather.
Repair costInsufficient verified pricing for this vehicle and repair
Replace power window regulator and motor. Prepare an itemized shop request.
Walk through this symptom: Windows, locks or radio stopped working →
Get checked1999–2002Suspension

Front suspension and steering parts wear out

What you'll notice
Clunks over bumps, wandering or loose steering, uneven front tire wear, and a shimmy you feel through the wheel.
Why it happens
Ball joints, stabilizer bar links and the steering idler arm carry a heavy front end and wear out, which lets the front wheels move around.
What to do
Have the front end inspected and the worn parts replaced; it is a common repair on these cars and it brings the steering and tire wear back to normal.
Repair costInsufficient verified pricing for this vehicle and repair
Replace front ball joints and stabilizer bar links. Prepare an itemized shop request.
Price guide

Repair prices for your 1999 Ford Crown Victoria

Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.

  • Replace intake manifold
  • Replace transmission with a remanufactured unit
  • Replace power window regulator and motor
  • Replace front ball joints and stabilizer bar links
Get help with a shop quote →

Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.

Safety recalls for the 1999 Ford Crown Victoria
Checking the NHTSA recall database…
Keep a copy of this pageDownload the snapshot, every problem, the repair costs and the recalls for your 1999 Ford Crown Victoria as a PDF you can save, print or bring to your shop.
This page is a general guide based on widely reported problems. Not every vehicle is affected, and it doesn't replace an in-person diagnosis.