Your 2007 Ford Crown Victoriaproblems, repair costs and recalls
What we've documented about the 2007 Ford Crown Victoria: problems owners and shops report, typical repair and upkeep costs, and safety recalls.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems for your 2007 Ford Crown Victoria
3 documented issues apply to 2007, most serious first.
Rusted steering shaft can cause loss of steering (recall)
- What you'll notice
- Stiff, notchy or clunking steering, or a steering wheel that suddenly stops controlling the front wheels.
- Why it happens
- Road-salt corrosion can seize the lower intermediate steering shaft, which can collapse the upper shaft and separate the column bearing. Ford recalled cars from salt-belt states, then recalled some again for incorrect repairs.
- What to do
- Stop driving if the steering feels unusual. Check the VIN for recalls 13V-385 and 14V-704 and get the free repair.
Coolant leak where the intake manifold meets the aluminum crossover
- What you'll notice
- Coolant slowly disappearing, a sweet smell, or wetness and crust at the front of the engine near the thermostat housing. Coolant can pool in the valley under the manifold where it is hard to see.
- Why it happens
- From 2002 Ford added an aluminum coolant crossover to the plastic intake manifold. That cut down on cracking, but the joint between the aluminum and plastic parts tends to seep as the engine ages. The gasket is not sold on its own, so the usual repair is a new manifold.
- What to do
- Keep the coolant topped up and watch the temperature gauge. Have the leak confirmed and the manifold replaced before it gets worse, and pull over if the engine starts to overheat.
Automatic transmission slipping or failure
- What you'll notice
- Slipping, harsh or late shifts, loss of overdrive, or the car not wanting to move in Drive or Reverse.
- Why it happens
- The 4-speed automatic is one of the most reported repairs on this car, and a failing front pump is a common cause. Police, taxi and high-idle use add heat and wear.
- What to do
- Have the fluid and shifting checked at the first sign of slipping. Continuing to drive a slipping transmission usually turns a smaller repair into a rebuild.
Repair prices for your 2007 Ford Crown Victoria
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Replace lower intermediate steering shaft
- Replace intake manifold and gaskets
- Replace transmission with a remanufactured unit
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Checking the NHTSA recall database…