Home › Code lookup › P0005
Powertrain code · Fuel and air

P0005 Fuel Shutoff Valve "A" Control Circuit/Open

How urgent? Get it checked in the next few days

What it means

Some engines, mostly diesels, have an electric fuel shutoff valve that opens to let the engine run and closes to stop it. The computer has seen an open or broken connection in the wiring that controls this valve.

Can I keep driving?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Check the fuse and relay for the fuel shutoff circuit
  2. Inspect the valve connector and wiring
  3. Test the solenoid resistance and operation

Signs you may notice

  • Check engine light on
  • Engine may not start or may stall
  • Engine may not shut off right away when the key is turned off

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonDamaged or corroded wiring to the shutoff valve
  • CommonLoose or corroded connector
  • CommonFailed fuel shutoff valve solenoid
  • PossibleBlown fuse or bad relay feeding the valve
  • PossibleEngine computer driver fault

Typical repair once the cause is confirmed

Repair the wiring or connector, or replace the fuel shutoff solenoid if it has failed.

Repair costInsufficient verified pricing for this vehicle and repair
Replace fuel shutoff valve solenoid. Prepare an itemized shop request.
Walk through it step by step: Car won't start →

Common questions

What does P0005 mean?

Some engines, mostly diesels, have an electric fuel shutoff valve that opens to let the engine run and closes to stop it. The computer has seen an open or broken connection in the wiring that controls this valve.

Can I drive with code P0005?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What causes P0005?

Common possibilities to test include: damaged or corroded wiring to the shutoff valve; loose or corroded connector; failed fuel shutoff valve solenoid; blown fuse or bad relay feeding the valve. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.