P0008 Engine Position System Performance (Bank 1)
What it means
The computer compares the crankshaft and camshaft sensor signals and found that the timing between them on bank 1 is off. On many engines this points to a stretched timing chain.
Can I keep driving?
If it runs smoothly you can usually drive gently to a shop soon, but don't put it off. Check the oil level now. If you hear a loud rattle, the engine misfires, loses power or stalls, or the oil light comes on, stop driving; a chain that jumps teeth can badly damage the engine.
What to test before replacing parts
Check oil level and condition, look for related cam and crank codes, and compare cam-to-crank deviation values on a scan tool before replacing the timing chain, phasers or sensors.
- Check the oil level and condition
- Look for related codes such as P0009, P0016 to P0019
- Have a shop check cam-to-crank deviation values with a scan tool
Signs you may notice
- Check engine light on
- Rough idle or hesitation
- Rattle from the front of the engine at startup
- Hard starting or lower fuel economy
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonStretched timing chain
- CommonLow oil level or overdue oil changes speeding up chain wear
- CommonWorn timing chain guides or tensioner
- PossibleFaulty camshaft actuator or oil control valve
- PossibleFaulty crankshaft or camshaft sensor
Typical repair once the cause is confirmed
Usually a timing chain set with guides and tensioners. Keeping up with oil changes helps prevent it from coming back.
Where it shows up
- Very well known on the GM 3.6L V6 (Chevrolet Traverse, Equinox, GMC Acadia, Cadillac CTS) from roughly 2007 to 2012
Known on these vehicles
Common questions
What does P0008 mean?
The computer compares the crankshaft and camshaft sensor signals and found that the timing between them on bank 1 is off. On many engines this points to a stretched timing chain.
Can I drive with code P0008?
If it runs smoothly you can usually drive gently to a shop soon, but don't put it off. Check the oil level now. If you hear a loud rattle, the engine misfires, loses power or stalls, or the oil light comes on, stop driving; a chain that jumps teeth can badly damage the engine.
What causes P0008?
Common possibilities to test include: stretched timing chain; low oil level or overdue oil changes speeding up chain wear; worn timing chain guides or tensioner; faulty camshaft actuator or oil control valve. A shop should confirm the cause before replacing parts.