Home › Code lookup › P000C
Powertrain code · Engine

P000C "A" Camshaft Position Slow Response (Bank 2)

How urgent? Get it checked in the next few days

What it means

The variable valve timing system moves the "A" (usually intake) camshaft on bank 2 to change engine timing. The computer saw the camshaft take too long to reach the position it asked for.

Can I keep driving?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Check the oil level and change oil if it is dirty or overdue
  2. Inspect the oil control valve and its screen for sludge
  3. Check for other cam timing codes

Signs you may notice

  • Check engine light on
  • Rough idle or hesitation
  • Reduced power or fuel economy

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonLow, dirty or wrong-grade engine oil
  • CommonSticking camshaft oil control valve (VVT solenoid)
  • PossibleWorn camshaft phaser
  • PossibleStretched timing chain

Typical repair once the cause is confirmed

Often an oil change with the correct oil, then a new oil control valve if the code returns. A worn phaser or chain is less common.

Repair costInsufficient verified pricing for this vehicle and repair
Replace camshaft oil control valve. Prepare an itemized shop request.
Walk through it step by step: Check engine light on →

Common questions

What does P000C mean?

The variable valve timing system moves the "A" (usually intake) camshaft on bank 2 to change engine timing. The computer saw the camshaft take too long to reach the position it asked for.

Can I drive with code P000C?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What causes P000C?

Common possibilities to test include: low, dirty or wrong-grade engine oil; sticking camshaft oil control valve (vvt solenoid); worn camshaft phaser; stretched timing chain. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.