P061E Internal Control Module Brake Signal Performance
What it means
The engine computer's internal check of the brake pedal signal failed.
Can I keep driving?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Test the battery and charging system
- Check the computer power and ground circuits and connectors
- Check for manufacturer software updates or service bulletins
Signs you may notice
- Check engine light on
- Cruise control may not work
- Possible reduced power
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonInternal computer fault
- CommonErratic or faulty brake light switch signal
- PossibleLow voltage or poor power and ground connections
- PossibleComputer software that needs an update
Typical repair once the cause is confirmed
Fix any power or ground problem first; otherwise the computer may need reprogramming or replacement (a new one usually must be programmed to the car).
Common questions
What does P061E mean?
The engine computer's internal check of the brake pedal signal failed.
Can I drive with code P061E?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What causes P061E?
Common possibilities to test include: internal computer fault; erratic or faulty brake light switch signal; low voltage or poor power and ground connections; computer software that needs an update. A shop should confirm the cause before replacing parts.