P0620 Generator Control Circuit
What it means
The computer found a problem, such as a broken connection, in the circuit it uses to control the alternator. This part charges the battery and powers the electrical system while the engine runs.
Can I keep driving?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Inspect the alternator wiring and connector for damage or corrosion
- Check related fuses and relays
- Test the alternator with a meter or scan tool and compare with spec
Signs you may notice
- Battery warning light on
- Dim lights or a battery that keeps going dead
- Check engine light on
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonFaulty alternator
- CommonBroken wire or loose or corroded connector
- PossibleBlown fuse or failed relay
- PossibleComputer driver circuit fault (rare)
Typical repair once the cause is confirmed
Usually a new alternator or a repair to the alternator wiring or connector.
Common questions
What does P0620 mean?
The computer found a problem, such as a broken connection, in the circuit it uses to control the alternator. This part charges the battery and powers the electrical system while the engine runs.
Can I drive with code P0620?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What causes P0620?
Common possibilities to test include: faulty alternator; broken wire or loose or corroded connector; blown fuse or failed relay; computer driver circuit fault (rare). A shop should confirm the cause before replacing parts.