Home › Code lookup › P0626
Powertrain code · Electrical

P0626 Generator Field/F Terminal Circuit High

How urgent? Get it checked in the next few days

What it means

The computer sees higher voltage than expected in the circuit that controls the alternator field circuit, often from a wire shorted to power or a failed part. This part lets the computer control how hard the alternator charges.

Can I keep driving?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Inspect the alternator field circuit wiring and connector for damage or corrosion
  2. Check related fuses and relays
  3. Test the alternator field circuit with a meter or scan tool and compare with spec

Signs you may notice

  • Battery warning light on
  • Dim lights or a battery that keeps going dead
  • Check engine light on

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonControl wire shorted to power
  • CommonFaulty or shorted alternator field circuit
  • PossibleCorroded connector
  • PossibleComputer driver circuit fault (rare)

Typical repair once the cause is confirmed

Usually a new alternator or a repair to the alternator wiring or connector.

Repair costInsufficient verified pricing for this vehicle and repair
Walk through it step by step: Battery light on →

Common questions

What does P0626 mean?

The computer sees higher voltage than expected in the circuit that controls the alternator field circuit, often from a wire shorted to power or a failed part. This part lets the computer control how hard the alternator charges.

Can I drive with code P0626?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What causes P0626?

Common possibilities to test include: control wire shorted to power; faulty or shorted alternator field circuit; corroded connector; computer driver circuit fault (rare). A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.