P0627 Fuel Pump "A" Control Circuit/Open
What it means
The computer found a break or problem in the circuit it uses to run the fuel pump, so the engine may not get enough fuel.
Can I keep driving?
If the engine sputters, hesitates or has stalled, stop driving and have it towed; the pump could cut out in traffic and leave you stranded. If it runs normally, go straight to a shop and avoid long trips or highways.
What to test before replacing parts
Check the fuse and relay, test power and ground at the pump and its driver module, inspect connectors for corrosion, and check fuel pressure before replacing the pump or module.
- Check the fuel pump fuse and relay
- Inspect the connectors at the fuel pump and fuel pump module for corrosion
- Check fuel pressure while cranking and running
Signs you may notice
- Engine cranks but will not start
- Stalling or sputtering while driving
- Hesitation or loss of power
- Check engine light on
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonFaulty fuel pump driver or control module
- CommonDamaged wiring or corroded connector at the fuel pump or its module
- PossibleFaulty fuel pump
- PossibleBlown fuse or failed fuel pump relay
- PossibleEngine computer fault (rare)
Typical repair once the cause is confirmed
Usually a wiring or connector repair or a new fuel pump control module; sometimes the fuel pump itself.
Common questions
What does P0627 mean?
The computer found a break or problem in the circuit it uses to run the fuel pump, so the engine may not get enough fuel.
Can I drive with code P0627?
If the engine sputters, hesitates or has stalled, stop driving and have it towed; the pump could cut out in traffic and leave you stranded. If it runs normally, go straight to a shop and avoid long trips or highways.
What causes P0627?
Common possibilities to test include: faulty fuel pump driver or control module; damaged wiring or corroded connector at the fuel pump or its module; faulty fuel pump; blown fuse or failed fuel pump relay. A shop should confirm the cause before replacing parts.