Home › Code lookup › P062A
Powertrain code · Fuel and air

P062A Fuel Pump "A" Control Circuit Range/Performance

How urgent? Get it checked in the next few days

What it means

The circuit that controls the fuel pump control circuit is not behaving the way the computer expects. This part runs the fuel pump that feeds fuel to the engine.

Can I keep driving?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Inspect the fuel pump control circuit wiring and connector for damage or corrosion
  2. Check related fuses and relays
  3. Test the fuel pump control circuit with a meter or scan tool and compare with spec

Signs you may notice

  • Engine cranks but will not start
  • Stalling or loss of power
  • Check engine light on

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFaulty fuel pump control circuit
  • CommonCorroded connector or high resistance in the wiring
  • PossibleLow system voltage
  • PossibleComputer driver circuit fault (rare)

Typical repair once the cause is confirmed

Usually a wiring or connector repair, or a new fuel pump control module or fuel pump.

Repair costInsufficient verified pricing for this vehicle and repair
Replace fuel pump control module. Prepare an itemized shop request.
Walk through it step by step: Car won't start →

Common questions

What does P062A mean?

The circuit that controls the fuel pump control circuit is not behaving the way the computer expects. This part runs the fuel pump that feeds fuel to the engine.

Can I drive with code P062A?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What causes P062A?

Common possibilities to test include: faulty fuel pump control circuit; corroded connector or high resistance in the wiring; low system voltage; computer driver circuit fault (rare). A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.