Home › Code lookup › P0631
Powertrain code · Transmission

P0631 VIN Not Programmed or Incompatible - TCM

How urgent? Get it checked in the next few days

What it means

The transmission computer doesn't have this car's vehicle identification number (VIN) stored, or it has the wrong one.

Can I keep driving?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Read the stored VIN with a scan tool and compare it with the car
  2. Program the VIN with a dealer-level scan tool

Signs you may notice

  • Check engine light on
  • Transmission may go into limp mode

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonTransmission computer replaced or reprogrammed without the vehicle ID being set
  • CommonUsed computer from another vehicle installed
  • PossibleInterrupted programming
  • PossibleInternal computer fault

Typical repair once the cause is confirmed

Program the correct VIN into the transmission computer.

Common questions

What does P0631 mean?

The transmission computer doesn't have this car's vehicle identification number (VIN) stored, or it has the wrong one.

Can I drive with code P0631?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What causes P0631?

Common possibilities to test include: transmission computer replaced or reprogrammed without the vehicle id being set; used computer from another vehicle installed; interrupted programming; internal computer fault. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.