Home › Code lookup › P063B
Powertrain code · Electrical

P063B Generator Voltage Sense Circuit Range/Performance

How urgent? Get it checked in the next few days

What it means

The wire the computer uses to sense the alternator output voltage is giving a reading that does not make sense, so it may not control charging correctly.

Can I keep driving?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Measure charging voltage at the battery with the engine running
  2. Inspect the alternator connector and sense wiring

Signs you may notice

  • Battery warning light on
  • Battery undercharging or overcharging
  • Check engine light on

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonDamaged sense wire or corroded connector
  • CommonFaulty alternator or voltage regulator
  • PossibleBlown fuse
  • PossibleComputer fault (rare)

Typical repair once the cause is confirmed

Usually a wiring or connector repair, or a new alternator.

Walk through it step by step: Battery light on →

Common questions

What does P063B mean?

The wire the computer uses to sense the alternator output voltage is giving a reading that does not make sense, so it may not control charging correctly.

Can I drive with code P063B?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What causes P063B?

Common possibilities to test include: damaged sense wire or corroded connector; faulty alternator or voltage regulator; blown fuse; computer fault (rare). A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.