P063E Auto Configuration Throttle Input Not Present
What it means
While setting itself up, the computer couldn't detect the throttle or gas pedal input it expected.
Can I keep driving?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Check that throttle and pedal connectors are plugged in and undamaged
- Confirm the computer is configured for the vehicle
Signs you may notice
- Check engine light on
- Engine may not start or may stay at idle
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonUnplugged or damaged throttle or pedal sensor connector
- CommonWiring problem in the throttle or pedal circuit
- PossibleComputer not configured for this vehicle
- PossibleFaulty throttle or pedal sensor
Typical repair once the cause is confirmed
Usually reconnecting or repairing the throttle or pedal wiring, then configuring the computer.
Common questions
What does P063E mean?
While setting itself up, the computer couldn't detect the throttle or gas pedal input it expected.
Can I drive with code P063E?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What causes P063E?
Common possibilities to test include: unplugged or damaged throttle or pedal sensor connector; wiring problem in the throttle or pedal circuit; computer not configured for this vehicle; faulty throttle or pedal sensor. A shop should confirm the cause before replacing parts.