Home › Code lookup › P063F
Powertrain code · Computer

P063F Auto Configuration Engine Coolant Temperature Input Not Present

How urgent? Get it checked in the next few days

What it means

While setting itself up, the computer couldn't detect the engine coolant temperature sensor input.

Can I keep driving?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Check that the coolant temperature sensor is plugged in and undamaged
  2. Check the sensor reading on a scan tool

Signs you may notice

  • Check engine light on
  • Cooling fans may run constantly
  • Engine may run poorly

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonUnplugged or damaged coolant temperature sensor connector
  • CommonWiring problem in the sensor circuit
  • PossibleFaulty coolant temperature sensor
  • PossibleComputer not configured for this vehicle

Typical repair once the cause is confirmed

Usually reconnecting or repairing the sensor wiring, or a new coolant temperature sensor.

Common questions

What does P063F mean?

While setting itself up, the computer couldn't detect the engine coolant temperature sensor input.

Can I drive with code P063F?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What causes P063F?

Common possibilities to test include: unplugged or damaged coolant temperature sensor connector; wiring problem in the sensor circuit; faulty coolant temperature sensor; computer not configured for this vehicle. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.