P064A Fuel Pump Control Module
What it means
The module that controls the fuel pump reported a fault, so the pump may not run correctly.
Can I keep driving?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Check the fuel pump control module connector for corrosion
- Check module power, ground and fuel pressure
Signs you may notice
- Engine cranks but will not start
- Stalling or loss of power
- Check engine light on
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonFaulty fuel pump control module
- CommonCorroded connector or damaged wiring at the module
- PossibleLow voltage or poor ground to the module
- PossibleFaulty fuel pump drawing too much current
Typical repair once the cause is confirmed
Usually a new fuel pump control module or a wiring repair.
Common questions
What does P064A mean?
The module that controls the fuel pump reported a fault, so the pump may not run correctly.
Can I drive with code P064A?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What causes P064A?
Common possibilities to test include: faulty fuel pump control module; corroded connector or damaged wiring at the module; low voltage or poor ground to the module; faulty fuel pump drawing too much current. A shop should confirm the cause before replacing parts.