Home › Code lookup › P064D
Powertrain code · Computer

P064D Internal Control Module O2 Sensor Processor Performance Bank 1

How urgent? Book a check when convenient

What it means

The part of the engine computer that reads the oxygen sensors on bank 1 failed a self-check.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Test the battery and charging system
  2. Check the computer power and ground circuits and connectors
  3. Check for manufacturer software updates or service bulletins

Signs you may notice

  • Check engine light on
  • Possible poor fuel economy

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonInternal computer fault
  • CommonShorted oxygen sensor or heater wiring
  • PossibleLow voltage or poor power and ground connections
  • PossibleComputer software that needs an update

Typical repair once the cause is confirmed

Fix any power or ground problem first; otherwise the computer may need reprogramming or replacement (a new one usually must be programmed to the car).

Common questions

What does P064D mean?

The part of the engine computer that reads the oxygen sensors on bank 1 failed a self-check.

Can I drive with code P064D?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P064D?

Common possibilities to test include: internal computer fault; shorted oxygen sensor or heater wiring; low voltage or poor power and ground connections; computer software that needs an update. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.