Home › Code lookup › P0683
Powertrain code · Engine

P0683 Glow Plug Control Module to PCM Communication Circuit

How urgent? Book a check when convenient

What it means

The engine computer and the glow plug control module are having trouble communicating. Glow plugs heat the cylinders so a diesel engine starts easily in cold weather.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Inspect the module connector and the wiring to the engine computer
  2. Check module power and ground

Signs you may notice

  • Hard starting in cold weather
  • Rough running or white smoke right after a cold start
  • Check engine light on

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonDamaged wiring or corroded connector between the computer and the module
  • CommonFaulty glow plug control module
  • PossiblePoor power or ground at the module
  • PossibleEngine computer fault (rare)

Typical repair once the cause is confirmed

Usually a wiring repair or a new glow plug control module.

Walk through it step by step: Hard to start when cold →

Common questions

What does P0683 mean?

The engine computer and the glow plug control module are having trouble communicating. Glow plugs heat the cylinders so a diesel engine starts easily in cold weather.

Can I drive with code P0683?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P0683?

Common possibilities to test include: damaged wiring or corroded connector between the computer and the module; faulty glow plug control module; poor power or ground at the module; engine computer fault (rare). A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.