Home › Code lookup › P0687
Powertrain code · Electrical

P0687 ECM/PCM Power Relay Control Circuit High

How urgent? Get it checked in the next few days

What it means

The computer sees higher voltage than expected in the circuit that controls the engine computer power relay, often from a wire shorted to power or a failed part. This part supplies main power to the engine computer and keeps it on briefly after shutdown.

Can I keep driving?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Inspect the engine computer power relay wiring and connector for damage or corrosion
  2. Check related fuses and relays
  3. Test the engine computer power relay with a meter or scan tool and compare with spec

Signs you may notice

  • Engine may not start or may stall
  • Battery may drain overnight if the relay sticks on
  • Check engine light on

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonControl wire shorted to power
  • CommonFaulty or shorted engine computer power relay
  • PossibleCorroded connector
  • PossibleComputer driver circuit fault (rare)

Typical repair once the cause is confirmed

Usually a wiring or connector repair, or a new engine computer power relay if it tests bad.

Walk through it step by step: Car won't start →

Common questions

What does P0687 mean?

The computer sees higher voltage than expected in the circuit that controls the engine computer power relay, often from a wire shorted to power or a failed part. This part supplies main power to the engine computer and keeps it on briefly after shutdown.

Can I drive with code P0687?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What causes P0687?

Common possibilities to test include: control wire shorted to power; faulty or shorted engine computer power relay; corroded connector; computer driver circuit fault (rare). A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.