Home › Code lookup › P068A
Powertrain code · Electrical

P068A ECM/PCM Power Relay De-Energized Performance - Too Early

How urgent? Book a check when convenient

What it means

The power to the engine computer was cut off before it finished its shutdown routine after the engine was turned off.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Check the battery terminals and relay connections
  2. Look for a service bulletin or software update

Signs you may notice

  • Check engine light on
  • Usually no change in how the car drives
  • Learned settings may be lost

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFaulty engine computer power relay
  • CommonLoose or corroded battery terminals or relay connection
  • PossibleBattery disconnected while the computer was still powered
  • PossibleComputer software that needs an update

Typical repair once the cause is confirmed

Often a battery connection repair or new relay; some vehicles need a software update.

Common questions

What does P068A mean?

The power to the engine computer was cut off before it finished its shutdown routine after the engine was turned off.

Can I drive with code P068A?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P068A?

Common possibilities to test include: faulty engine computer power relay; loose or corroded battery terminals or relay connection; battery disconnected while the computer was still powered; computer software that needs an update. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.