Home › Code lookup › P068F
Powertrain code · Engine

P068F Cylinder 8 Glow Plug Control Circuit High

How urgent? Book a check when convenient

What it means

The computer sees higher voltage than expected in the glow plug control circuit for cylinder 8. Glow plugs heat the cylinders so a diesel engine starts easily in cold weather.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Measure the cylinder 8 glow plug resistance
  2. Inspect the glow plug wire and connector

Signs you may notice

  • Hard starting in cold weather
  • Rough running or white smoke right after a cold start
  • Check engine light on

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonBurned-out (open) glow plug
  • CommonBroken glow plug wire or loose connector
  • PossibleWire shorted to power
  • PossibleFaulty glow plug control module

Typical repair once the cause is confirmed

Usually a new glow plug or a wiring repair; the control module if the plug and wiring test good.

Walk through it step by step: Hard to start when cold →

Common questions

What does P068F mean?

The computer sees higher voltage than expected in the glow plug control circuit for cylinder 8. Glow plugs heat the cylinders so a diesel engine starts easily in cold weather.

Can I drive with code P068F?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P068F?

Common possibilities to test include: burned-out (open) glow plug; broken glow plug wire or loose connector; wire shorted to power; faulty glow plug control module. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.