P069D Cylinder 10 Glow Plug Control Circuit High
What it means
The computer sees higher voltage than expected in the glow plug control circuit for cylinder 10. Glow plugs heat the cylinders so a diesel engine starts easily in cold weather.
Can I keep driving?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Measure the cylinder 10 glow plug resistance
- Inspect the glow plug wire and connector
Signs you may notice
- Hard starting in cold weather
- Rough running or white smoke right after a cold start
- Check engine light on
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonBurned-out (open) glow plug
- CommonBroken glow plug wire or loose connector
- PossibleWire shorted to power
- PossibleFaulty glow plug control module
Typical repair once the cause is confirmed
Usually a new glow plug or a wiring repair; the control module if the plug and wiring test good.
Common questions
What does P069D mean?
The computer sees higher voltage than expected in the glow plug control circuit for cylinder 10. Glow plugs heat the cylinders so a diesel engine starts easily in cold weather.
Can I drive with code P069D?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What causes P069D?
Common possibilities to test include: burned-out (open) glow plug; broken glow plug wire or loose connector; wire shorted to power; faulty glow plug control module. A shop should confirm the cause before replacing parts.