P06B6 Internal Control Module Knock Sensor Processor 1 Performance
What it means
The part of the engine computer that listens to the knock sensors (processor 1) failed a self-check.
Can I keep driving?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Test the battery and charging system
- Check the computer power and ground circuits and connectors
- Check for manufacturer software updates or service bulletins
Signs you may notice
- Check engine light on
- Possible reduced power or poor fuel economy
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonInternal computer fault
- CommonShorted knock sensor or knock sensor wiring
- PossibleLow voltage or poor power and ground connections
- PossibleComputer software that needs an update
Typical repair once the cause is confirmed
Fix any power or ground problem first; otherwise the computer may need reprogramming or replacement (a new one usually must be programmed to the car).
Common questions
What does P06B6 mean?
The part of the engine computer that listens to the knock sensors (processor 1) failed a self-check.
Can I drive with code P06B6?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What causes P06B6?
Common possibilities to test include: internal computer fault; shorted knock sensor or knock sensor wiring; low voltage or poor power and ground connections; computer software that needs an update. A shop should confirm the cause before replacing parts.