P06BE Cylinder 6 Glow Plug Circuit Range/Performance
What it means
The glow plug for cylinder 6 is drawing more or less current than the computer expects. Glow plugs heat the cylinders so a diesel engine starts easily in cold weather.
Can I keep driving?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Measure the cylinder 6 glow plug resistance and current draw
- Inspect the glow plug connector for corrosion
Signs you may notice
- Hard starting in cold weather
- Rough running or white smoke right after a cold start
- Check engine light on
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonWorn or failing glow plug
- CommonHigh resistance from a corroded or loose glow plug connector
- PossibleFaulty glow plug control module
Typical repair once the cause is confirmed
Usually a new glow plug or a connector repair.
Common questions
What does P06BE mean?
The glow plug for cylinder 6 is drawing more or less current than the computer expects. Glow plugs heat the cylinders so a diesel engine starts easily in cold weather.
Can I drive with code P06BE?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What causes P06BE?
Common possibilities to test include: worn or failing glow plug; high resistance from a corroded or loose glow plug connector; faulty glow plug control module. A shop should confirm the cause before replacing parts.