Home › Code lookup › P06C2
Powertrain code · Engine

P06C2 Cylinder 10 Glow Plug Circuit Range/Performance

How urgent? Book a check when convenient

What it means

The glow plug for cylinder 10 is drawing more or less current than the computer expects. Glow plugs heat the cylinders so a diesel engine starts easily in cold weather.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Measure the cylinder 10 glow plug resistance and current draw
  2. Inspect the glow plug connector for corrosion

Signs you may notice

  • Hard starting in cold weather
  • Rough running or white smoke right after a cold start
  • Check engine light on

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonWorn or failing glow plug
  • CommonHigh resistance from a corroded or loose glow plug connector
  • PossibleFaulty glow plug control module

Typical repair once the cause is confirmed

Usually a new glow plug or a connector repair.

Walk through it step by step: Hard to start when cold →

Common questions

What does P06C2 mean?

The glow plug for cylinder 10 is drawing more or less current than the computer expects. Glow plugs heat the cylinders so a diesel engine starts easily in cold weather.

Can I drive with code P06C2?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P06C2?

Common possibilities to test include: worn or failing glow plug; high resistance from a corroded or loose glow plug connector; faulty glow plug control module. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.