Home › Code lookup › U0400
Network code · Network

U0400 Invalid Data Received

How urgent? Book a check when convenient

What it means

A module received a message over the vehicle network that it could not use because the data was out of range or did not make sense.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Scan all modules to find which one is sending bad data
  2. Test the battery and grounds

Signs you may notice

  • Warning light on
  • Features that depend on the bad message may not work

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFaulty sensor feeding another module
  • CommonModule software that needs an update
  • PossibleLow battery voltage
  • PossibleNetwork wiring problem

Typical repair once the cause is confirmed

Find the module or sensor sending bad data and repair or update it.

Common questions

What does U0400 mean?

A module received a message over the vehicle network that it could not use because the data was out of range or did not make sense.

Can I drive with code U0400?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes U0400?

Common possibilities to test include: faulty sensor feeding another module; module software that needs an update; low battery voltage; network wiring problem. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.