Home › Code lookup › U0401
Network code · Network

U0401 Invalid Data Received From ECM/PCM "A"

How urgent? Get it checked in the next few days

What it means

Another module received a message from the engine computer (ECM/PCM) that does not make sense, such as a value that is out of range or does not add up. It runs the engine, so other modules rely on it for engine speed, temperature and other data.

Can I keep driving?

Use care. Bad data from the engine computer can cause stalling, a no-start or odd transmission behavior. If it stalls or several warnings come on, have it towed. If it runs normally, get it checked soon.

What to test before replacing parts

Read codes in the engine computer first, since it may be reporting a sensor fault, then check its power, grounds and network wiring, and look for software updates before replacing modules.

  1. Check the engine computer (ECM/PCM) for its own stored codes and fix those first
  2. Test the battery and grounds
  3. Check for software updates or service bulletins

Signs you may notice

  • Check engine light and several other warning lights on
  • Car may not start, or may stall
  • Gauges such as the tachometer may stop working

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonA faulty engine sensor (such as throttle or pedal position) giving the engine computer bad data
  • CommonThe engine computer (ECM/PCM) needs a software update
  • CommonLow battery voltage or poor ground causing bad messages
  • PossibleNetwork wiring problem or interference
  • PossibleFailed engine computer (ECM/PCM)

Typical repair once the cause is confirmed

Fix any fault in the engine computer (ECM/PCM) or its sensors, then update the software if needed.

Repair costInsufficient verified pricing for this vehicle and repair
Diagnose engine computer data fault and update software. Prepare an itemized shop request.
Walk through it step by step: Car won't start →

Common questions

What does U0401 mean?

Another module received a message from the engine computer (ECM/PCM) that does not make sense, such as a value that is out of range or does not add up. It runs the engine, so other modules rely on it for engine speed, temperature and other data.

Can I drive with code U0401?

Use care. Bad data from the engine computer can cause stalling, a no-start or odd transmission behavior. If it stalls or several warnings come on, have it towed. If it runs normally, get it checked soon.

What causes U0401?

Common possibilities to test include: a faulty engine sensor (such as throttle or pedal position) giving the engine computer bad data; the engine computer (ecm/pcm) needs a software update; low battery voltage or poor ground causing bad messages; network wiring problem or interference. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.