Home › Code lookup › U0405
Network code · Network

U0405 Invalid Data Received From Cruise Control Module

How urgent? Book a check when convenient

What it means

Another module received a message from the cruise control module that does not make sense, such as a value that is out of range or does not add up. It is part of the driver assistance features.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Check the cruise control module for its own stored codes and fix those first
  2. Test the battery and grounds
  3. Check for software updates or service bulletins

Signs you may notice

  • Driver assist feature may be turned off
  • Warning message on the dash

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFaulty sensor or input feeding the cruise control module
  • CommonThe cruise control module needs a software update
  • CommonLow battery voltage or poor ground causing bad messages
  • PossibleNetwork wiring problem or interference
  • PossibleFailed cruise control module

Typical repair once the cause is confirmed

Fix any fault in the cruise control module or its sensors, then update the software if needed.

Common questions

What does U0405 mean?

Another module received a message from the cruise control module that does not make sense, such as a value that is out of range or does not add up. It is part of the driver assistance features.

Can I drive with code U0405?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes U0405?

Common possibilities to test include: faulty sensor or input feeding the cruise control module; the cruise control module needs a software update; low battery voltage or poor ground causing bad messages; network wiring problem or interference. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.