Home › Code lookup › P000E
Powertrain code · Fuel and air

P000E Fuel Volume Regulator Control Exceeded Learning Limit

How urgent? Get it checked in the next few days

What it means

The computer constantly adjusts the fuel volume regulator to keep fuel pressure right. It has had to adjust it further than allowed, which means something in the fuel system is not behaving normally.

Can I keep driving?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Check and replace the fuel filter if needed
  2. Compare commanded and actual fuel rail pressure with a scan tool
  3. Check low-side fuel supply pressure

Signs you may notice

  • Check engine light on
  • Possible hard starting or rough running
  • Possible loss of power

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonWorn or sticking fuel volume regulator
  • CommonClogged fuel filter or low supply pressure
  • PossibleWorn high-pressure fuel pump
  • PossibleFaulty fuel rail pressure sensor

Typical repair once the cause is confirmed

Usually a fuel filter and, if needed, a new fuel volume regulator.

Repair costInsufficient verified pricing for this vehicle and repair
Replace fuel volume regulator. Prepare an itemized shop request.
Walk through it step by step: Check engine light on →

Common questions

What does P000E mean?

The computer constantly adjusts the fuel volume regulator to keep fuel pressure right. It has had to adjust it further than allowed, which means something in the fuel system is not behaving normally.

Can I drive with code P000E?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What causes P000E?

Common possibilities to test include: worn or sticking fuel volume regulator; clogged fuel filter or low supply pressure; worn high-pressure fuel pump; faulty fuel rail pressure sensor. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.