P0026 Intake Valve Control Solenoid Circuit Range/Performance (Bank 1)
What it means
The intake valve control solenoid on bank 1 helps change valve timing or lift. The computer sees that the solenoid circuit is working, but the result is not what it expected.
Can I keep driving?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Check the oil level and condition
- Inspect the solenoid and its screen for sludge
- Check the solenoid wiring and resistance
Signs you may notice
- Check engine light on
- Rough idle or hesitation
- Reduced power or fuel economy
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonSticking valve control solenoid
- CommonLow, dirty or wrong-grade engine oil
- PossibleWiring or connector problem at the solenoid
- PossibleWorn camshaft phaser or timing components
Typical repair once the cause is confirmed
Often an oil change, then a new valve control solenoid if the code returns.
Common questions
What does P0026 mean?
The intake valve control solenoid on bank 1 helps change valve timing or lift. The computer sees that the solenoid circuit is working, but the result is not what it expected.
Can I drive with code P0026?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What causes P0026?
Common possibilities to test include: sticking valve control solenoid; low, dirty or wrong-grade engine oil; wiring or connector problem at the solenoid; worn camshaft phaser or timing components. A shop should confirm the cause before replacing parts.