P0030 HO2S Heater Control Circuit (Bank 1 Sensor 1)
What it means
Oxygen sensors have a built-in heater so they start working soon after a cold start. The computer found a fault, such as an open circuit, in the heater circuit of the upstream (before the catalytic converter) oxygen sensor on bank 1.
Can I keep driving?
Usually you can keep driving normally and schedule a repair; the heater only helps the oxygen sensor warm up quickly. Get it checked sooner if the engine starts running rough, other codes appear, or you smell fuel. The car may not pass an emissions or inspection test until it's fixed.
What to test before replacing parts
Check the O2 heater fuse first, then measure heater resistance and check power and ground at the connector. Inspect the wiring near the exhaust for melting before replacing the sensor.
- Check the oxygen sensor heater fuse
- Inspect the sensor wiring for melted or rubbed-through spots near the exhaust
- Measure the heater resistance at the sensor and compare to spec
Signs you may notice
- Check engine light on
- Usually no change in how the car drives
- Fuel economy may drop slightly, mostly after cold starts
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonFailed heater inside the oxygen sensor
- CommonBlown fuse for the oxygen sensor heaters
- CommonDamaged or melted wiring near the exhaust
- PossibleCorroded or loose sensor connector
- PossibleEngine computer heater driver fault
Typical repair once the cause is confirmed
Most often a new oxygen sensor. If the fuse is blown, find the short that blew it before replacing the sensor.
Common questions
What does P0030 mean?
Oxygen sensors have a built-in heater so they start working soon after a cold start. The computer found a fault, such as an open circuit, in the heater circuit of the upstream (before the catalytic converter) oxygen sensor on bank 1.
Can I drive with code P0030?
Usually you can keep driving normally and schedule a repair; the heater only helps the oxygen sensor warm up quickly. Get it checked sooner if the engine starts running rough, other codes appear, or you smell fuel. The car may not pass an emissions or inspection test until it's fixed.
What causes P0030?
Common possibilities to test include: failed heater inside the oxygen sensor; blown fuse for the oxygen sensor heaters; damaged or melted wiring near the exhaust; corroded or loose sensor connector. A shop should confirm the cause before replacing parts.