P0035 Turbocharger/Supercharger Bypass Valve Control Circuit High
What it means
On turbocharged or supercharged engines, a bypass (blow-off or diverter) valve releases boost pressure when you lift off the gas. The computer found a voltage that is too high in the circuit that controls this valve.
Can I keep driving?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Inspect the valve connector and wiring
- Check vacuum hoses around the turbo for cracks
- Command the valve with a scan tool and listen or watch for it to move
Signs you may notice
- Check engine light on
- Loss of power or slow boost build-up
- Possible limp mode or whooshing noise
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonFailed bypass (diverter) valve solenoid
- CommonDamaged wiring or loose connector
- PossibleCracked vacuum hose to the valve, on vacuum-operated types
- PossibleEngine computer driver fault
Typical repair once the cause is confirmed
Usually a new bypass valve or a wiring repair.
Common questions
What does P0035 mean?
On turbocharged or supercharged engines, a bypass (blow-off or diverter) valve releases boost pressure when you lift off the gas. The computer found a voltage that is too high in the circuit that controls this valve.
Can I drive with code P0035?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What causes P0035?
Common possibilities to test include: failed bypass (diverter) valve solenoid; damaged wiring or loose connector; cracked vacuum hose to the valve, on vacuum-operated types; engine computer driver fault. A shop should confirm the cause before replacing parts.