P0049 Turbocharger/Supercharger Turbine Overspeed
What it means
The computer has calculated or measured that the turbocharger is spinning faster than its safe limit. This can quickly wear out or damage the turbo.
Can I keep driving?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Check for boost leaks at hoses and the intercooler
- Check the wastegate or vane actuator for sticking
- Compare boost pressure readings with a scan tool
Signs you may notice
- Check engine light on
- Engine may go into limp mode
- Whistling or unusual turbo noise
- Possible black smoke
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonWastegate or variable vanes stuck in the high-boost position
- CommonBoost leak making the turbo work harder
- PossibleFaulty boost pressure or turbo speed sensor
- PossibleRestricted air filter or intake
Typical repair once the cause is confirmed
Fix whatever is making the turbo overspin, often a stuck wastegate or vane actuator or a boost leak. Avoid hard driving until repaired.
Common questions
What does P0049 mean?
The computer has calculated or measured that the turbocharger is spinning faster than its safe limit. This can quickly wear out or damage the turbo.
Can I drive with code P0049?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What causes P0049?
Common possibilities to test include: wastegate or variable vanes stuck in the high-boost position; boost leak making the turbo work harder; faulty boost pressure or turbo speed sensor; restricted air filter or intake. A shop should confirm the cause before replacing parts.