P005F Turbocharger/Supercharger Boost Control "B" Supply Voltage Circuit High
What it means
The "B" boost control actuator needs a steady power supply to work. The computer found that the supply voltage to it is too high.
Can I keep driving?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Check the fuse and relay feeding the actuator
- Measure supply voltage at the actuator connector
- Inspect the wiring harness for damage
Signs you may notice
- Check engine light on
- Loss of power or limp mode
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonPower wire shorted to another voltage source
- PossibleCharging system putting out too much voltage
- PossibleFaulty boost control actuator
Typical repair once the cause is confirmed
Usually a fuse, relay or wiring repair; sometimes a new boost actuator.
Common questions
What does P005F mean?
The "B" boost control actuator needs a steady power supply to work. The computer found that the supply voltage to it is too high.
Can I drive with code P005F?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What causes P005F?
Common possibilities to test include: power wire shorted to another voltage source; charging system putting out too much voltage; faulty boost control actuator. A shop should confirm the cause before replacing parts.