Home › Code lookup › P0065
Powertrain code · Fuel and air

P0065 Air Assisted Injector Control Range/Performance

How urgent? Book a check when convenient

What it means

Some engines blow a small stream of air past the fuel injectors to break the fuel into a finer mist. The computer found that the control for this air-assist system is not working the way it should.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Inspect the air-assist hoses and valve
  2. Check the valve wiring and connector

Signs you may notice

  • Check engine light on
  • Possible rough idle or hesitation, mostly when cold

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonCracked or disconnected air-assist hose
  • CommonSticking air-assist control valve
  • PossibleCarbon buildup in the air passages

Typical repair once the cause is confirmed

Usually repairing a leaking hose or replacing the air-assist control valve.

Walk through it step by step: Rough idle or shaking when stopped →

Common questions

What does P0065 mean?

Some engines blow a small stream of air past the fuel injectors to break the fuel into a finer mist. The computer found that the control for this air-assist system is not working the way it should.

Can I drive with code P0065?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P0065?

Common possibilities to test include: cracked or disconnected air-assist hose; sticking air-assist control valve; carbon buildup in the air passages. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.